PRO-JECT DEBUT CARBON THE ORIGINAL (PICK IT S2 MM) – BLACK
AED 3,000.00
1 in stock
Description
Description
Precision Drive System
Accurate, steady speed is key to natural sound, and the Debut Carbon – The Original’s drive system is designed to deliver just that. A heavy steel platter adds rotational mass, allowing it to spin smoothly and minimize small speed fluctuations. It sits on a precision sub-platter made of glass-fibre-reinforced ABS, which is lightweight, rigid, and dimensionally stable.
The aluminium motor pulley is machined to a tolerance of 1/1,000 mm and drives the sub-platter through a precision belt. A special TPE motor suspension isolates the motor from the plinth, preventing vibrations from reaching the platter or stylus.
The result is stable, accurate speed with low wow and flutter, ensuring that music retains its correct pitch and timing.
Premium Pick it S2 MM
The Pick it S2 MM is manufactured by cartridge specialists Ortofon and specially tuned by Pro-Ject’s own design team. Its elliptical stylus tip precisely tracks the record grooves, delivering detailed sound and a wide, open stereo image.
Ortofon’s split pole pins provide a flat frequency response comparable to that of moving coil cartridges.
Featuring a robust cantilever of the type used in DJ cartridges, the Pick it S2 MM is built for reliable everyday use without compromising sound quality.
Additional information
- 8.6-inch one-piece carbon fibre tonearm
- Damped counterweight reduces unwanted resonances
- Pre-adjusted Pick it S2 MM cartridge
- High-quality MDF chassis
- Precision belt-drive system
- Clean power supply with DC/AC power generator
- Heavy steel platter
- Semi-symmetrical cable with metal connectors
- Gold-plated RCA connectors
- Silicone-damped tonearm lift
- Dust cover and felt mat included
- Quality handmade in Europe
| Specification | Details |
|---|---|
| Speed | 33, 45 RPM (manual speed change) |
| Drive Principle | Belt drive |
| Platter | 300 mm, 1.7 kg heavy steel platter with felt mat |
| Platter Bearing | High-precision stainless steel axle in brass bushing |
| Wow & Flutter | 33 RPM: ±0.17%; 45 RPM: ±0.15% |
| Speed Drift | 33 RPM: ±0.50%; 45 RPM: ±0.60% |
| Signal-to-Noise Ratio | 68 dB |
| Tonearm | 8.6-inch one-piece carbon fibre tonearm |
| Effective Arm Length / Mass | 218.5 mm / 7 g |
| Overhang | 18.5 mm |
| Included Accessories | 15 V DC / 0.8 A power supply, dust cover, 7-inch single adapter |
| Power Consumption | 4 W / 0 W (standby) |
| Dimensions (W × H × D) | 415 × 118 × 320 mm |
| Net Weight | 5.5 kg |
